GN 415 Side thrust pins

Technical datasheet

Select type

GN 415-B1

Side thrust pins

Wedge, top

Select item

Technical specifications

Scroll horizontally

Main specifications
General information

Main specifications

Types

Type A1: Cylinder, horizontal

Type A2: Cylinder, vertical

Type B1: Wedge, top

Type B2: Wedge, down

Type B3: Wedge, right

Type B4: Wedge, left

Identification no.

1: standard spring load

2: high spring load

Body

Die-cast zinc alloy ZD

coated in epoxy resin

black, RAL 9005, matte finish

Thrust pin

Plastic, smooth KG

Plastic POM, black

Stainless Steel, smooth NG

metal injection molded AISI 630

Stainless Steel, ribbed NR

metal injection molded AISI 630

Spring

Stainless Steel AISI 301

Screw

Steel, zinc nickel coated (Version KG)

Stainless Steel, A2 (Version NG / NR)

General information

Features and applications

Side thrust pins GN 415 have a compact design and offer maximum flexibility for tensioning and holding parts. A variety of thrust pin designs as well as two different spring forces are available.

Depending on the installation situation, the side thrust pins offer a pull-down effect operating within height h₂. They are fastened by means of holes or slots.

The side thrust pins are installed fully assembled. If necessary, the installation position of the thrust pin slide can be rotated by 4x90° according to the sketch. When installing version KG, the shaped thread in the plastic slider should be reused and the tightening torque limited.