GN 722.4 Spring indexing plungers with ring or lever

Fixing by means of welding, steel

Select type

 
 

Select item

loading

Technical specifications

Scroll horizontally
Main specifications

Versions

  • Type A: square body, mounted, with pull ring, without rest position.
  • Type AU: square body, unmounted, with pull ring, without rest position.
  • Type R: circular body, mounted, with pull ring, without rest position.
  • Type RU: circular body, unmounted, with pull ring, without rest position.
  • Type C: square body, mounted (riveted), with pull ring, with rest position.
  • Type CU: square body, unmounted, with pull ring, with rest position.
  • Type T: circular body, mounted (riveted), with pull ring, with rest position.
  • Type TU: circular body, unmounted, with pull ring, with rest position.
  • Type E: square body, mounted (riveted), with pull lever, with stop position.
  • Type EU: square body, unmounted, with pull lever, with stop position.
  • Type V: circular body, mounted (riveted), with pull lever, with stop position.
  • Type VU: circular body, unmounted, with pull lever, with stop position.

Guide

Steel precision casting

blackened, weldable     ST

Lifting ring

Steel precision casting

zinc-plated, blue passivated

Lever

Steel precision casting

zinc-plated, blue passivated

Plunger

Zinc-plated steel, blue passivated

Spring

AISI 316Ti stainless Steel

Grub screw

Steel, zinc-plated

General information

Features and applications

In the GN 722.4 spring indexing plungers the plunger pin is actuated by the pull ring or lever. This operation is performed manually, with a cable or by means of a pulling hook in the versions with pull ring. The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer or in case of contamination. In case of a welded fixing, the unassembled AU, RU, CU, TU, EU, VU versions are particularly recommended to avoid alterations to the microstructure of the material due to heating of the spring and the tip. In this case, the indexing plunger is assembled only after the surface treatment of the welded guide.

Elesa
Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.
Ganter

YOU MAY ALSO LIKE

ASK THE EXPERT